Uvp TB-107 Transilluminator Ballast Bedienungsanleitung PDF herunterladen

TB-107 Rev STD

Transilluminator Ballast Replacement

Overview

The purpose of this Technical Bulletin is to explain the process of uninstalling and reinstalling a

transilluminator ballast on a UVP transilluminator.

To complete this procedure, the following tools and parts will be required:

• Phillips-head screwdriver

• 1/4” nut driver

• New transilluminator ballast

Caution: This procedure requires a moderate level of technical competence. If you are not

comfortable working with electronics, tools and/or related components, contact UVP for

assistance.

Removal Procedure

When performing the following procedure, place all components (screws, nuts, etc.) in a secure

location as they will be reused for installation.

1. Turn off the transilluminator by placing the power switch on the front of the unit in the OFF

position. Then, unplug the unit from the wall power.

2. Remove the four Phillips-head screws and washers securing the transilluminator filter frame

to the body of the transilluminator. Lifting up, remove the transilluminator filter frame from the

transilluminator body. Place the filter frame aside.

Two of Four

Phillips-Head

Screws and

Washers

Transilluminator

Filter Frame

Transilluminator

Body

1 2 3 4 5 6

Inhaltsverzeichnis

Seite 1 - Removal Procedure

TB-107 Rev STD TTeecchhnniiccaall BBuulllleettiinn TTBB--110077 Transilluminator Ballast Replacement Overview The purpose of this Technical Bul

Seite 2

3. Inside the unit, locate the side reflector panels which are two removable reflective metal panels located at each end of the transilluminator ligh

Seite 3

7. Place the new ballast next to the old ballast, also atop the fixed reflector panels, in the same orientation as the old ballast. 8. Grasp one

Seite 4 - Installation Procedure

10. Working wire by wire, repeat these steps until all wires have been transferred from the old to the new ballast, taking care to match the location

Seite 5

As the edges of the side reflector panels are sharp, ensure that all wiring is moved out of the way during installation of the side reflector panels t

Seite 6 - Technical Support

Technical Support Contact UVP Technical Support for additional assistance: If you are in North America, South America, East Asia or Australia: If yo

Kommentare zu diesen Handbüchern

Keine Kommentare

Uvp TB-107 Transilluminator Ballast Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Gesundheit und Hygiene Uvp TB-107 Transilluminator Ballast herunter. UVP TB-107 Transilluminator Ballast User Manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Gesundheit und Hygiene Uvp TB-107 Transilluminator Ballast